Pro Silicone 35 is a 2-part, platinum-catalysed, addition curing silicone rubber. Pro Silicone 35 features low viscosity and vacuum degassing is not required for most applications. Pro Silicone 35 has excellent tear resistance and exhibits low linear shrinkage (<0.1%). Pro Silicone 35 will reproduce fine details and is food safe. It is suitable for industrial and artistic applications. Pro Silicone 35 silicone can be used to cast a variety of materials including chocolate, wax, gypsum- based polymers, low melt alloys, urethane, epoxy and polyester resins. The silicone will cure in closed environments and is therefore suitable for potting, encapsulating and large castings. In some cases, a release agent, such as Mikon F57 aerosol wax or Silicone 100 release, should be used to prolong mould life. Pro Silicone 35 can be accelerated with heat to reduce the pot life and cure time. The silicone can be thickened with silicone thixotropic liquid, RTV Thixo, for brush-on applications. Certain substances and substrates may inhibit the cure of Pro Silicone 35. Care must be taken to avoid contamination from tin curing silicones, chlorinated rubber compounds, PVC plasticizers, epoxy amines, sulphur containing materials and butyl elastomers.
Mixing
The Part A and Part B must be measured out accurately using a gram scale. Mix the two components thoroughly, paying attention to the sides and bottom of the container. Do not mix more than can be used within the working time of the system.
Part by weight (Part A: Part B) 1:1
Delivery: 5 – 7 Business days
(E&OE)
Reviews
There are no reviews yet.