Greencast 160 Epoxy Resin + SD7160 Slow Hardener – UV Stable Clear

Bio-based, clear, UV stable epoxy for thick castings using the SD7160 mega slow hardener. The resin has a light blue appearance. This system is easily pigmented with our range of epoxy pigments for translucent, opaque and luminous effects. This product has been designed as a casting resin, not a coating resin. The open surface typically needs to be flatted and polished to achieve a perfectly flat, glossy finish. The open surface can also be coated with Surf Clear to produce a high gloss, flat finish. UV Stability – This product will resist yellowing and is water resistant, however, it does not provide 100% UV protection and is not suitable for permanent, outdoor exposure. UV protection can be improved by overcoating with protective urethane paint such as TopClear or UV resistant wax polish. Curing Time – Depends on the ambient temperature but around 48hrs to touch-dry, but longer in thin castings. Allow at least 72hrs before demoulding or attempting to do any finishing work on the resin. The epoxy will take about 30 days to reach full hardness although this can be accelerated with a post cure of 24hr @ 40 to 60°C. Kit – Each kit contains a bottle of resin and a bottle of hardener which are mixed together at 100:42 parts by weight or 2- parts resin to 1-part hardener by volume.
Coverage: 885 millilitres per 1 kg with 1 liter covering 1 square meter to 1mm of thickness

Properties

• Very low reactivity allowing high thicknesses up to 10 cm at 20 °C.
• High clarity polymer, colourless and with good brightness.
• Room temperature curing
• Almost odourless.
• 2:1 ratio and very easy mixing.
• Excellent degassing.
• Excellent impact and thermal shock resistance.
• Good UV resistance

Delivery: 1 – 5 Business days

SPECS & DATA SHEET

(E&OE)