Arduino For Sale Online in South Africa | DIY GEEK

Arduino Mega 2560 R3

Strato Konstas — Thu, 02 Jul 2020 10:08:55 +0000

The Arduino Mega 2560 is a micro-controller board based on the AT mega 2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila.

Specifications:

Micro-controller: AT mega 2560
Operating Voltage: 5 V
Input Voltage (recommended): 7-12 V
Input Voltage (limit): 6-20 V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 20 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 8 KB used by boot-loader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz
LED_BUILTIN: 13
Length: 101.52 mm
Width: 53.3 mm
Weight: 37 g

Please enquire about Stock Availability.
(E&OE)

The post Arduino Mega 2560 R3 appeared first on DIY Geek.

Arduino CNC Shield V4 + Arduino Nano + 3 x A4988 Driver Kit

Strato Konstas — Mon, 18 May 2020 14:17:17 +0000

This is the Arduino CNC Shield V4 Expansion Board for engraving machine. It includes the Arduino Nano, and Stepper Motor Drivers.

3D printer stepper motor driver CNC shield V4 needs to work with the Arduino Nano board ( Included ). It can be used as driver expansion board for engraving machines and 3D printers. It has in total 3 channel slots for A 4988 stepper motor driver modules (included) for driving 3 channel of stepper motors. Each channel of stepper motor only needs 2 IO ports, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project.

3 axis stepper motor driver
Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine.
2A can be controlled within the two-phase four-wire stepper motor.
Released the digital IO interface, easy to connect to other modules, such as END STOP.
Released the I2 C interface, you can connect to the LCD I2 C or other I2 C module.
Power DC5V interface, 7.5-12 V voltage input.
GRBL compatible
Works with Arduino Nano.

Please enquire for Delivery and Stock Availability.
(E&OE)

The post Arduino CNC Shield V4 + Arduino Nano + 3 x A4988 Driver Kit appeared first on DIY Geek.

CNC Shield UNO-R3 Board 4 x A4988 Driver Kit

Muhammad — Mon, 24 Feb 2020 12:13:02 +0000

Features:

1. Uses removable A4988 compatible stepper drivers.
2. The extension board can be used for carving machine, 3 d printer driver expansion board
3. GRBL 0.8 compatible. (Open source firmware that runs on an Arduino-UNO that turns G-code commands into stepper signals)
4. PWM Spindle and direction pins,4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
5. Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
6. Please note that this is an unassembled kit and Basic soldering skills are needed.

A4988 Stepper Motor Driver:

Color: Red
Size(L*W*H): 20 x 15 x 10 mm
Thermal shutdown circuitry: Yes
Crossover-current protection: Yes
Ground fault protection: Yes
Load short-circuit protection: Yes
Compatible logic supply: 3.3V and 5 V
Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16

Features:

1. Mix with slow current decay modes.
2. Internal UVLO and Low RDS (On) Output.
3. Automatic current decay mode detection/selection.
4. Synchronous rectification for low power dissipation.
5. Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver.

Uno R3 Board:

MCU: ATmega328
Clock speed: 16 MHz
USB interface: ATmega16U2
Operating voltage: 5 V
I-I / O pin output current: 40 mA max
3.3 V output current: 150 mA max
Digital I/O pins: 14 (including 6 with PWM capability)
Analog input pins: 6
EEPROM: 1 kB
Static RAM (SRAM): 2 kB
Flash memory: 32 kB
Size(LxWxH): 68 x 53 x 10 mm

Please enquire for delivery

(E&OE)

The post CNC Shield UNO-R3 Board 4 x A4988 Driver Kit appeared first on DIY Geek.

USB Cable

Muhammad — Mon, 24 Feb 2020 12:20:33 +0000

This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino boards like the Uno.

Features

Connector 1: USB Type A Male
Connector 2: USB Type B Male
Cable Length: approximately 2 Meters

(E&OE)

The post USB Cable appeared first on DIY Geek.

Design Spark Arduino Case

Muhammad — Mon, 24 Feb 2020 12:13:18 +0000

UNO Board and Ethernet Shield are held via clip-in grooves – No Screws Required
All cut-outs are pre-cut into the case supplied with rubber feet gloss Finish
This case is designed to house and protect the Arduino UNO and Ethernet Shield.
For Use With: Arduino Uno, Ethernet Shield

Features:

Color: Black

External Dimensions: 95 x 57 x 44mm

Body Material: Polystyrene

(E&OE)

The post Design Spark Arduino Case appeared first on DIY Geek.

Arduino UNO WiFi V2

Muhammad — Mon, 24 Feb 2020 10:12:09 +0000

The UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with. The UNO is the most used and documented board of the whole Arduino family.ck from spindle makes it easy to setup and machine multi-pass threads accurately.

Overview:

Uno WiFI Rev2 comes with a brand new 8-bit microprocessor from Microchip, and an onboard IMU (Inertial Measurement Unit). As for the WiFi connection, that’s made secure with the new ECC608 crypto chip accelerator.

Microcontroller ATMega 4809
Architecture AVR
Operating Voltage 5V
Flash Memory 48 KB
SRAM 6 KB
EEPROM 256 byte
DC Current per I/O Pin 40 mA (I/O Pins)
Input Voltage 7-12 V
Digital I/O Pins 20
Interfaces I2C, SPI, UART
PWM Output 5
Analog I/O Pins 6/0
Weight 8.9 g
Product Code ABX00021

Please enquire for delivery

The post Arduino UNO WiFi V2 appeared first on DIY Geek.

Arduino Uno Rev3

Muhammad — Mon, 24 Feb 2020 10:12:07 +0000

Overview:

Arduino Uno is a micro-controller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. You can tinker with your UNO without worrying too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.

“Uno” means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0. The Uno board and version 1.0 of Arduino Software (IDE) were the reference versions of Arduino, now evolved to newer releases. The Uno board is the first in a series of USB Arduino boards, and the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Arduino index of boards.

Specifications:

Micro-controller: AT mega 328 P
Operating Voltage: 5 V
Input Voltage (recommended): 7-12 V
Input Voltage (limit): 6-20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
PWM Digital I/O Pins: 6
Analog Input Pins: 6
DC Current per I/O Pin: 20 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB (AT mega 328 P) of which 0.5 KB used by boot-loader
SRAM: 2 KB (AT mega 328 P)
EEPROM: 1 KB (AT mega 328 P)
Clock Speed: 16 MHz
LED_BUILTIN: 13
Length: 68.6 mm
Width: 53.4 mm
Weight: 25 g

Please enquire for delivery.
(E&OE)

The post Arduino Uno Rev3 appeared first on DIY Geek.

Arduino Uno – Clone Board – USB B – Female Connector

Muhammad — Mon, 24 Feb 2020 10:12:06 +0000

You can simply use sensors, all kinds of electronic components connection (such as LED lights, buzzer, buttons and photosensitive resistance, etc.), make all sorts of interesting projects.
Using high-speed microprocessor controller (AT-MEGA 328), development interface and environment are all very simple, easy to understand, very suitable for beginners to learn.

Features:

Digital I / O: 0 – 13
Analog I / O: 0 – 5
USB B – Female Connector
Support ISP download function
Input voltage: DC 5 V ~ 9 V (No external power supply when connected to the computer)
Output voltage: DC 5 V / 3.3 V
Using Atmel At-mega 328 microprocessor controller

Please enquire for Delivery.
(E&OE)

The post Arduino Uno – Clone Board – USB B – Female Connector appeared first on DIY Geek.

Arduino CNC Shield V3

Muhammad — Mon, 24 Feb 2020 10:12:06 +0000

This expansion board as a driver expansion board, can be used for 3D Axis, engraving machines & 3D printers.
It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.
UNO for Arduino module IO port correspondence introduction.

IO corresponding pins:

UNO for Arduino———————- expansion board
8 ———————— EN ( stepper motor driver enable , active low )
7 ———————– Z.DIR (Z -axis direction control )
6 ———————– Y.DIR (Y -axis direction control )
5 ———————– X.DIR (X -axis direction control )
4 ———————- Z.STEP (Z -axis stepper control )
3 ———————- Y.STEP (Y -axis stepper control )
2 ———————- X.STEP (X -axis stepper control )

Please enquire for Delivery and Stock Availability.
(E&OE)

The post Arduino CNC Shield V3 appeared first on DIY Geek.

Arduino Case – 3D Printed

Muhammad — Mon, 24 Feb 2020 12:12:05 +0000

UNO Board are held via clip-in grooves – No Screws Required

All cut-outs are pre-cut into the case

This case is designed to house and protect the Arduino UNO

For Use With: Arduino Uno

Features:

Color: Various

External Dimensions: 95 x 57 x 44 mm

Body Material: PLA

Please enquire for delivery

The post Arduino Case – 3D Printed appeared first on DIY Geek.