Wide MPP voltage range makes DC string design with your choice of module easy.  

Best suited to smaller domestic systems where no parallel operation is needed. 

Operates at 24V.

• Built-in Wi-Fi for mobile monitoring
• Selectable high power charging current
• Built in BMS for optimal Li-Ion performance
• Compatible with utility mains or generator

DATA SHEET

Email for Stock Availability
(E&OE)

The post KODAK Solar Off-Grid Inverter LP 3.2kW 24V appeared first on DIY Geek.

Power Pairing with 1 x Kodak Solar Off-Grid Inverter 6.2kW and 1 x Pylontech UP5000!!!

This part is a special offer made up of the following items:

1 x Pylontech UP5000 4.8kWh Li-Ion Battery 48V
1 x KODAK Solar Off-Grid Inverter 6.2kW 48V

Inverter:

• Removable LCD control module with multiple communications servers and ATM
• Built-in Bluetooth for mobile monitoring (Android App is available)
• Replaceable fan design for ease of maintenance Supply load from Grid or PV, even battery is not available
• Configurable AC/PV output usage timer and prioritization Selectable high power charging current
• Selectable input voltage range for home appliances and personal computers
• Compatible to Utility Mains or generator input Auto restart while AC is recovering Cold start function

Battery:

• 1.5 C industry leading C- rating allows single battery deployments for 5kW inverter systems
• 3.686 kWhrs capable of 15 units in parallel totaling 55.29 kWhrs
• RS485 and CAN communication ensures full compatibility with KODAK and Sunsynk
• Industry leading 95% DOD allowing for more useable capacity from the battery
• 10 year standard warranty

Email  For Stock Availability.
(E&EO)

The post KODAK Solar 6.2kW Inverter with Pylontech UP5000 4.8kWh Off-Grid System appeared first on DIY Geek.

The 5kW rated power of the KODAK inverter, when matched with KODAK BL3.6 battery module provides a powerful solution. The BL3.6 has 3.6kWh capacity and an incredible discharge rating of 1.5C. This means the BL3.6 can continously discharge 5kW.

That’s perfect for supplying some of the higher powered electrical loads in the evening, or running the essential household loads with no interruption during a grid failure.

The KODAK off-grid is a pure sine wave inverter. It has built in RS485 BMS communication for optimal Lithium battery management. 

It has a max DC input voltage of 500V, making it perfect for series string connections.

This part is a special offer made up of the following items:

1 x Pylontech UP5000 4.8kWh Li-Ion Battery 48V
1 x KODAK Solar Off-Grid Inverter VM3 5kW 48V

Inverter:

• Removable LCD control module with multiple communications servers and ATM
• Built-in Bluetooth for mobile monitoring (Android App is available)
• Replaceable fan design for ease of maintenance Supply load from Grid or PV, even battery is not available
• Configurable AC/PV output usage timer and prioritization Selectable high power charging current
• Selectable input voltage range for home appliances and personal computers
• Compatible to Utility Mains or generator input Auto restart while AC is recovering Cold start function

Battery:

• 1.5 C industry leading C- rating allows single battery deployments for 5kW inverter systems
• 3.686 kWhrs capable of 15 units in parallel totaling 55.29 kWhrs
• RS485 and CAN communication ensures full compatibility with KODAK and Sunsynk
• Industry leading 95% DOD allowing for more useable capacity from the battery
• 10 year standard warranty

Email  For Stock Availability.
(E&EO)

The post KODAK 5kW VM3 Inverter with Pylontech UP5000 4.8kWh Off-Grid System appeared first on DIY Geek.

The 5kW rated power of the KODAK inverter, when matched with KODAK BL3.6 battery module provides a powerful solution. The BL3.6 has 3.6kWh capacity and an incredible discharge rating of 1.5C. This means the BL3.6 can continously discharge 5kW.

That’s perfect for supplying some of the higher powered electrical loads in the evening, or running the essential household loads with no interruption during a grid failure.

The KODAK off-grid is a pure sine wave inverter. It has built in RS485 BMS communication for optimal Lithium battery management. 

It has a max DC input voltage of 500V, making it perfect for series string connections.

This part is a special offer made up of the following items:

1 x Kodak 3.68kWh 48V Battery Module
1 x KODAK Solar Off-Grid Inverter VM3 5kW 48V

Inverter:

• Removable LCD control module with multiple communications servers and ATM
• Built-in Bluetooth for mobile monitoring (Android App is available)
• Replaceable fan design for ease of maintenance Supply load from Grid or PV, even battery is not available
• Configurable AC/PV output usage timer and prioritization Selectable high power charging current
• Selectable input voltage range for home appliances and personal computers
• Compatible to Utility Mains or generator input Auto restart while AC is recovering Cold start function

Battery:

• 1.5 C industry leading C- rating allows single battery deployments for 5kW inverter systems
• 3.686 kWhrs capable of 15 units in parallel totaling 55.29 kWhrs
• RS485 and CAN communication ensures full compatibility with KODAK and Sunsynk
• Industry leading 95% DOD allowing for more useable capacity from the battery
• 10 year standard warranty

Email  For Stock Availability.
(E&EO)

The post KODAK 5kW VM3 Inverter with Kodak 3.68kWh 48V Battery Module appeared first on DIY Geek.

This part is a special offer made up of the following items:

2 x Pylon UP5000 4.8kWh Li-Ion Solar Battery 48V
1 x KODAK Solar Off-Grid Inverter 10kW 48V

Inverter:

• Customizable status LED ring with RGB lights.
• Touchable buttons with large 5″ colored LCD.
• Built-in Wi-Fi for mobile monitoring (Android/iOS App is available).
• Supports USB On-the-Go function.
• Reserved communication port for BMS (RS485, CAN-BUS or RS232).
• Configurable AC/PV output usage.
• Compatible to Utility Mains or generator input.
• Built-in anti-dust kit.
• Built-in DC output for DC fan, LED bulb, router and so on.
• Parallel operation with 6 units.

Battery:

• Modular design for ease of expansion
• Higher usable capacity resulting in less battery modules installed
• Usable capacity 4 560Wh
• Parallel Capability of up to 16 units
• Allows for large installation of up to 72.96kWh with no LV Hub
• Intelligent BMS protecting battery cells
• 95% DoD with more usable capacity
• RS485 and CAN compatible
• Comes with a 5-year warranty non-extendable

Battery Improvements:

• C-Rating of 0.9C.
• The UP5000 battery can be upgraded to 0.9C rating capabilities through a firmware update.
• Continous charge and discharge current of 90A.

DATASHEET

Email  For Stock Availability.
(E&EO)

The post KODAK 10kW Inverter with 2 x Pylontech UP5000 4.8kWh Off-Grid Kit appeared first on DIY Geek.

The OG-PLUS6.2 has all the features you have come to expect and love from the OG-PLUS range with upgraded performance! The OG-PLUS6.2 provides a larger output power of 6200W and boasts a MPPT of 7000W!

In rural or end-of-line locations, the AC grid voltage can fluctuate across a wide range. Voltage that is sufficiently far from the nominal 230V can cause appliances to run much less efficiently, make them unable to function or causes damage in the long term. Kodak’s PLUS Off-Grid inverter is perfect for areas where grid electricity is less stable because it always produces smooth 230V AC, whether the grid is available or not. This is great for efficient running of appliances, but crucial for an uninterrupted supply for important loads such as servers or sensitive electronics. The OG-PLUS6.2 has Twin outputs that allows you to connect essential loads. Unessential loads can be switched off at a specific SoC and the remainder of battery power will only supply the essential loads.

Features:

• Built-in Wi-Fi for mobile remote monitoring
• Parallel operation up to 9 units
• Robust UPS (uninterrupted power supply) for essential loads with zero transfer time. Perfect for power sensitive loads.
• Massive 7000W MPPT – Enough power to provide loads and charge batteries
• High voltage MPPT allows for more flexible array designs
• Dual outputs to split non-essential loads and essential loads
• Large color LCD display with RGB LED ring light to indicate the current working mode

DATASHEET

Email  For Stock Availability.
(E&EO)

The post KODAK Solar Off-Grid Inverter 6.2kW 48V appeared first on DIY Geek.

The installation is very straight forward and only requires the installer to have a smartphone/laptop to hand; the only customer requirement is that the Internet router is close enough to the inverter that the two can be wired together with Ethernet cable. The unit provides a simple to install monitoring solution for end customers with access to web, iPhone and Android app monitoring. 

In addition to free access to the monitoring website there is also an installer level login so the installer can view all their KODAK inverters installed in one place. 

The unit provides a user friendly, easily accessible solution to inverter monitoring. Keywords: SOLDLSW, Display, Web Interface

Note: This product is not compatible with the KODAK OG,OG-X and OG-Plus range of OFF-GRID inverters.

Email for Stock Availability

(E&OE)

The post KODAK Data Logging Stick – wired LAN appeared first on DIY Geek.

You require one cable pack per system, with a maximum of 4 batteries when used with a 5kW or smaller system, one cable pack is required per battery when used on a larger than 5kW.  

This cable pack includes the following solar cables:

• 1 x 2m long power cable set (positive and negative) with applicable connector.
• 1 x 3m RJ45 Communication cable.

Email  for Stock Availability
(E&OE)

The post Cable Pack for Kodak FL5.2 appeared first on DIY Geek.

The KODAK OG 10 is the latest in the range of the KODAK OG products. With 10000W of capacity, it can easily take an average house off of the grid.

The KODAK OG 10 inverter comes with a large colored LCD display and built in Wi-Fi for online mobile monitoring. The dual MPPT’s will ensure you get optimal solar production.

Features:

• Customizable status LED ring with RGB lights
• Touchable button with large 5″ colored LCD
• Built-in Wi-Fi for mobile monitoring (Android/iOS App is available)
• Supports USB On-the-Go function
• Reserved communication port for BMS (RS485, CAN-BUS or RS232)
• Replaceable fan design for ease of maintenance
• Configurable AC/PV output usage timer and prioritization
• Selectable high power charging current
• Compatible to Utility Mains or generator input
• Built-in anti-dust kit
• Built-in DC output for DC fan, LED bulb, router and so on.
• Parallel operation with 6 units

DATASHEET

Email  For Stock Availability.
(E&EO)

The post KODAK Solar Off-Grid Inverter 10kW 48V appeared first on DIY Geek.

The KODAK OGS5.6 is the latest in the range of the KODAK OG products.

The KODAK OGS5.6 inverter comes with a large colored LCD display and built in Wi-Fi for online mobile monitoring. The RGB status light indicates the working status of the inverter while being aesthetically pleasing

Features:

• Pure sine wave MPPT solar inverter
• Customizable status LED ring with RGB lights
• Touchable button with 4.3″ colored LCD
• Wide DC input range
• Supports USB On-the-Go function
• Data log events stored in the inverter
• Built-in Wi-Fi for mobile monitoring (App is available)
• Reserved communication port for BMS
• Parallel operation with up to 9 units

DATASHEET

Email  For Stock Availability.
(E&EO)

The post KODAK Solar Off-Grid Inverter 5.6kW 48V appeared first on DIY Geek.