Printer Controllers - DIY Geek

CNC 3D Printer Kit

Tue, 29 Sep 2020 13:25:00 +0000

This CNC 3D Printer Kit consists of a Mega 2560 Board | Ramps 1.4 | DRV8825 | LCD 12864 | Heatbed MK2b for Arduino

Package Listing:

1 x Mega 2560 R3
1 x Ramps 1.4
1 x USB line
5 x DRV8825 Module with Heatsink
1 x PCB Heatbed MK2B
1 x 12864 LCD Control Panel
1 x Adapter
2 x Cable
6 x Mechanical Switch with Cable

Email for Stock Availability
(E&OE)

The post CNC 3D Printer Kit appeared first on DIY Geek.

Arduino Mega 2560 R3

Strato Konstas — Thu, 02 Jul 2020 10:08:55 +0000

The Arduino Mega 2560 is a micro-controller board based on the AT mega 2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila.

Specifications:

Micro-controller: AT mega 2560
Operating Voltage: 5 V
Input Voltage (recommended): 7-12 V
Input Voltage (limit): 6-20 V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 20 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 8 KB used by boot-loader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz
LED_BUILTIN: 13
Length: 101.52 mm
Width: 53.3 mm
Weight: 37 g

Please enquire about Stock Availability.
(E&OE)

The post Arduino Mega 2560 R3 appeared first on DIY Geek.

Arduino UNO WiFi V2

Muhammad — Mon, 24 Feb 2020 10:12:09 +0000

The UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with. The UNO is the most used and documented board of the whole Arduino family.ck from spindle makes it easy to setup and machine multi-pass threads accurately.

Overview:

Uno WiFI Rev2 comes with a brand new 8-bit microprocessor from Microchip, and an onboard IMU (Inertial Measurement Unit). As for the WiFi connection, that’s made secure with the new ECC608 crypto chip accelerator.

Microcontroller ATMega 4809
Architecture AVR
Operating Voltage 5V
Flash Memory 48 KB
SRAM 6 KB
EEPROM 256 byte
DC Current per I/O Pin 40 mA (I/O Pins)
Input Voltage 7-12 V
Digital I/O Pins 20
Interfaces I2C, SPI, UART
PWM Output 5
Analog I/O Pins 6/0
Weight 8.9 g
Product Code ABX00021

Please enquire for delivery

The post Arduino UNO WiFi V2 appeared first on DIY Geek.

Arduino Uno Rev3

Muhammad — Mon, 24 Feb 2020 10:12:07 +0000

Overview:

Arduino Uno is a micro-controller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. You can tinker with your UNO without worrying too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.

“Uno” means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0. The Uno board and version 1.0 of Arduino Software (IDE) were the reference versions of Arduino, now evolved to newer releases. The Uno board is the first in a series of USB Arduino boards, and the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Arduino index of boards.

Specifications:

Micro-controller: AT mega 328 P
Operating Voltage: 5 V
Input Voltage (recommended): 7-12 V
Input Voltage (limit): 6-20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
PWM Digital I/O Pins: 6
Analog Input Pins: 6
DC Current per I/O Pin: 20 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB (AT mega 328 P) of which 0.5 KB used by boot-loader
SRAM: 2 KB (AT mega 328 P)
EEPROM: 1 KB (AT mega 328 P)
Clock Speed: 16 MHz
LED_BUILTIN: 13
Length: 68.6 mm
Width: 53.4 mm
Weight: 25 g

Please enquire for delivery.
(E&OE)

The post Arduino Uno Rev3 appeared first on DIY Geek.

Arduino Uno – Clone Board – USB B – Female Connector

Muhammad — Mon, 24 Feb 2020 10:12:06 +0000

You can simply use sensors, all kinds of electronic components connection (such as LED lights, buzzer, buttons and photosensitive resistance, etc.), make all sorts of interesting projects.
Using high-speed microprocessor controller (AT-MEGA 328), development interface and environment are all very simple, easy to understand, very suitable for beginners to learn.

Features:

Digital I / O: 0 – 13
Analog I / O: 0 – 5
USB B – Female Connector
Support ISP download function
Input voltage: DC 5 V ~ 9 V (No external power supply when connected to the computer)
Output voltage: DC 5 V / 3.3 V
Using Atmel At-mega 328 microprocessor controller

Please enquire for Delivery.
(E&OE)

The post Arduino Uno – Clone Board – USB B – Female Connector appeared first on DIY Geek.

Arduino CNC Shield V3

Muhammad — Mon, 24 Feb 2020 10:12:06 +0000

This expansion board as a driver expansion board, can be used for 3D Axis, engraving machines & 3D printers.
It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.
UNO for Arduino module IO port correspondence introduction.

IO corresponding pins:

UNO for Arduino———————- expansion board
8 ———————— EN ( stepper motor driver enable , active low )
7 ———————– Z.DIR (Z -axis direction control )
6 ———————– Y.DIR (Y -axis direction control )
5 ———————– X.DIR (X -axis direction control )
4 ———————- Z.STEP (Z -axis stepper control )
3 ———————- Y.STEP (Y -axis stepper control )
2 ———————- X.STEP (X -axis stepper control )

Please enquire for Delivery and Stock Availability.
(E&OE)

The post Arduino CNC Shield V3 appeared first on DIY Geek.